If you are creating your home office, the major factor should be your comfort.
Sure, you can get the right office chair with the right desk, and this should help keep you comfortable, but there is a little more to it than that.
Many people suffer from serious back, neck, and shoulder pains because they sit at a desk for long hours each day perhaps the desk is not the right height, or the office chair doesn’t have the right spacing between it and the desk for your height.
An issue that often occurs is office desks being too low to the ground when compared to the height of your chair. This can result in you bending forward too far, this putting unneeded strain on your back, neck, shoulders, and arms, and can quickly become painful quite.
You probably thinking how to raise your office desk. Below we have a few ingenious ways of getting the job done.
Some methods are easier or more effective than others, which is why we are presenting you with all of the possibilities.
How to Raise Your Office Desk
Use a Carpet or Padding
If you just need to raise your office desk a little bit, a good option is to use a thick carpet, a thick carpet liner, or a thick pad of any sort.
Carpets and pads, even when combined, may only provide you with an extra inch of height, but an extra inch may be all you need.
However, if you want to raise everything including yourself, put the carpet under your office chair as well.
However, if you want to raise the desk in comparison to your office chair and your sitting position, then put the carpeting under the desk only, but not under the chair.
Build a Platform
The next option is to build a small platform. This is one of the more costly and labor-intensive processes, and it’s only recommended if you know about building wooden things and if you have the time.
You can buy some plywood and a couple of 2x4s, and use those to build a small raised stand or platform for the desk.
This is not going to be easy, particularly if you are not adept at working with your hands, but it can allow you to achieve a precise height that you need for comfort.
In all reality, although this is a possibility, it’s probably not something you will take the time or effort to do.
Take Advantage of Dual Level Floors
If you live in a house that has a room or rooms with dual-level floors, such as a small step that leads from a lower to a raised floor, this is something you could consider taking advantage of.
Instead of placing something under your desk, simply put the desk on the edge of the raised step.
Easy enough, right? Of course, the disadvantage is that because you can’t roll under the desk to get close to your keyboard you will need an extending keyboard tray to get it close enough to you.
Put Stands on Top of the Desk
Another option, although it’s not technically raising your desk, is to put a stand on your desk. In theory, this will achieve the same result that you are looking for.
Get a computer monitor and keyboard stand, so while your desk may not be any higher than before, the important components are.
Lower Your Chair
Once again, although this is technically not raising your desk, it can help achieve the same result, particularly if the real issue is the height of the chair.
If the chair is too high compared to the desk, and if you find that your feet cannot rest flat on the ground when sitting in the chair, the obvious solution is to simply lower the chair height.
Buy an Adjustable Height Desk
However, the easiest way to raise your desk is by getting one that allows for such adjustments in the first place. Some desks can be adjusted for height manually, and some electronic models can be raised or lowered with the push of a button.
Although they may not be inexpensive, they are the best way to achieve the most comfortable position for long-term work at a desk.
As you can see, there are ways to raise your office desk to allow for a higher degree of comfort.
Whatever the case may be, when you’re at your desk and on your computer, your back and neck should be straight and aligned, you shouldn’t be leaning forward, and your arms should be bent at a 90-degree angle at the elbows.